Metallic Quad Canes, Offset Foam Handle Walking Canes with Black, Chrome Plated or Bronze Adjustable - Walking Canes, Walking Sticks, and more at Fashionable Walking Canes

This Quad Cane comes in Classic Black, Shimmering Chrome Silver, and Metallic Bronze. The shaft is made with a strong aluminum and it is adjustable in length. This walking cane also comes with a foam handle that is very comfortable to grip. A quad base will also give you extra support. Walk with style with one of the 'Fabulous' different colored shafts to choose from.

This cane is designed for users up to 250lbs. For more information please click Here.

The Tip size on this cane is a specialty tip 1616: amm. This cane does come with 1 complementary tip on the cane. If you need an extra tip please go Here.

The approximate weight of this item is 1.8lbs.

The "Standard Size" for this cane is adj. from 29.5-38.5 inches. This is the maximum length that this cane is manufactured.
(You may choose to have the cane shortened if the "Optional Sizing" option is available under the "Add to Cart" button.)

WE OFFER FREE CANE SIZING WITH ANY ORDER!
(Canes cut from their orginal size will incur a 30% restocking fee if returned)

How to determine cane size when placing an order.
Choose 1 of 3 easy ways to determine cane length before placing order.

1. Measure the size of an existing cane.

Do this method by simply measuring from the lowest part on the top of the handle to the bottom of the rubber tip. Round up to the nearest half inch. (see Diagram Above)

2. Measure the cane user

a. Put on the user’s walking shoes.
b. Have the user stand naturally upright as much as possible.
c. Have their arms fall to the sides naturally with a normal relaxed bend at the elbow. (Please see Diagram Above for correct posture)
d. Using a tape measure or yard stick, measure the distance from their wrist joint (bottom crease at the wrist) down to the floor. Round up to the nearest half inch.
(**For accurate length a second person must read measurement to prevent wrist from moving)

3. Measure half the height in inches. (Only use if Step 1 or 2 are not available as options)

(Although this works for most cane users it is not always exact. Choose this option at your
own risk a 30% restocking fee applies to all returned cut canes)
Most users cane measurements will be within one inch of half the users height.

a. Convert height into inches...(example 66 Inches) then divide in half = 33 inches.
(round up to the nearest half inch.)
b. Then add half an inch to this height.
c. After receiving product use step #2 to confirm and change size if needed.

The Estimated height would be 33.5 inches for this example.

Optional Sizing - click here if you would like it shortened from its standard length.

To select a size for this walking cane please look for the option above that is located
near the "Add to Cart" Button Above.

*PLEASE NOTE: THIS INFORMATION IN NO WAY REPLACES A MEDICAL PROFESSIONAL’S RECOMMENDATION. CANES ARE NOT INTENDED TO BE USED LIKE A CRUTCH FOR FULL WEIGHT SUPPORT, CANES ARE INTENDED ONLY FOR BALANCE.
The sizing information above is the standard measurement for a walking cane. Some users may require a special length. As with any mobility device please see you doctor before sizing and use. Varying heel height of different shoes may change users size.
Sizing is a free courtesy. In most cases, sized canes will ship the same day. In rare cases sizing requests may not or cannot be sized. In these rare situations “pick up” call tags will not be issued and the item must be sent back to us to be sized. We will not ship out a new product. Please always check the item upon delivery to confirm the requested size. Canes can always be shortened but may not be lengthened.

Engraving is now available! Genuine Brass or Anodized Aluminum plaques are engraved and bent to the curve of the shaft of the cane. Please click on the images below to see more details.... (PLEASE NOTE - Engraving does not apply towards the $60 to recieve free shipping)