Scrimshaw Carved Acorn Fritz Handle Walking Cane With Black Beechwood Shaft and Silver Collar

Description

A beautiful fritz-styled scrimshaw handled walking cane. There is much attention to detail in each leaf around the handle and there are four adorable acorns on top. You will be sure to get a lot of attention when using such a unique and well-crafted walking cane. 

Scrimshaw etching is a unique art form dating back to the American Whale man. Once carved and finely detailed out of ivory or whale bone, you'll find our selection is art-crafted from a resin material to look like an original. The silver ring collar also brings sophistication to the neck of the black beechwood shaft. It is treated with a semi-gloss water-resistant finish for protection. Also, the wood is kiln-cured for strength and durability. Compared to other canes, these are more resistant to splintering or cracking, ensuring a superior product. To see a closer image, click-on the tab below the picture. ***Please note a scrimshaw walking cane, will not survive being dropped. These items will not be replaced or covered under warranty if they are broken. A fragile clay like material is used to make these items. The handle will break if it is dropped or fallen***

Specifications

• The Tip size on this cane is 18mm. This cane does come with 1 complementary tip on the cane. If you need an extra tip please go Here.
  

• The approximate weight of this item is 0.95lbs.
  

Cane Sizing

The maximum length for this cane is 36 inches. This is the length of this cane at its standard size.
(You may choose to have the cane shortened if the "Optional Sizing" option is available under the "Add to Cart" button.)

	WE OFFER FREE CANE SIZING WITH ANY ORDER! (Canes cut from their orginal size will incur a 30% restocking fee if returned)
	How to determine cane size when placing an order. Choose 1 of 3 easy ways to determine cane length before placing order.
1. Measure the size of an existing cane. Do this method by simply measuring from the lowest part on the top of the handle to the bottom of the rubber tip. Round up to the nearest half inch. (see Diagram Above)   2. Measure the cane user a. Put on the user’s walking shoes. b. Have the user stand naturally upright as much as possible. c. Have their arms fall to the sides naturally with a normal relaxed bend at the elbow. (Please see Diagram Above for correct posture) d. Using a tape measure or yard stick, measure the distance from their wrist joint (bottom crease at the wrist) down to the floor. Round up to the nearest half inch. (**For accurate length a second person must read measurement to prevent wrist from moving)   3. Measure half the height in inches. (Only use if Step 1 or 2 are not available as options) (Although this works for most cane users it is not always exact. Choose this option at your own risk a 30% restocking fee applies to all returned cut canes) Most users cane measurements will be within one inch of half the users height.   a. Convert height into inches...(example 66 Inches) then divide in half = 33 inches. (round up to the nearest half inch.) b. Then add half an inch to this height. c. After receiving product use step #2 to confirm and change size if needed. The Estimated height would be 33.5 inches for this example.     To select a size for this walking cane please look for the option below that is located above near the "Add to Cart" Button Above. Optional Sizing - click here if you would like it shortened from its standard length.
	*PLEASE NOTE: THIS INFORMATION IN NO WAY REPLACES A MEDICAL PROFESSIONAL’S RECOMMENDATION. CANES ARE NOT INTENDED TO BE USED LIKE A CRUTCH FOR FULL WEIGHT SUPPORT, CANES ARE INTENDED ONLY FOR BALANCE. The sizing information above is the standard measurement for a walking cane. Some users may require a special length. As with any mobility device please see you doctor before sizing and use. Varying heel height of different shoes may change users size. Sizing is a free courtesy. In most cases, sized canes will ship the same day. In rare cases sizing requests may not or cannot be sized. In these rare situations “pick up” call tags will not be issued and the item must be sent back to us to be sized. We will not ship out a new product. Please always check the item upon delivery to confirm the requested size. Canes can always be shortened but may not be lengthened.

Engraving

Engraving is now available! Genuine Brass or Stainless Steel plaques are engraved and bent to the curve of the shaft of the cane. Please click on the images below to see more details.... (PLEASE NOTE - Engraving does not apply towards the $60 to recieve free shipping)