Black & Grey with Stripe ClearForms Derby Walking Cane With Beechwood Shaft and Brass Collar

• Description
• Specifications
• Cane Sizing
• Engraving

Wow! This clear canes handle has been made from using a special acrylic process. By injecting a separate color into the handle, it creates the amazing design that you see. The shaft of this cane is made with a flawlessly ebony painted beechwood. Look at the artistic detail on these canes. The neck of the shaft has a two candy pin stripe of a metellic grey color. This black and grey cane has a very classy look and will be a great accessory for any casual or black tie event. Check out the entire series. The nicely added brass ring collar on the shaft also really pulls the entire cane together. To see a closer look of this cane, just click-on the tab below the picture."

• This cane is designed for users up to 180lbs. For more information please click Here.
  

• The Tip size on this cane is 16mm. This cane does come with 1 complementary tip on the cane. If you need an extra tip please go Here.
  

• The approximate weight of this item is 0.65lbs.
  

The "Standard Size" for this cane is 36 inches. This is the maximum length that this cane is manufactured.
(You may choose to have the cane shortened if the "Optional Sizing" option is available under the "Add to Cart" button.)

	WE OFFER FREE CANE SIZING WITH ANY ORDER! (Canes cut from their orginal size will incur a 30% restocking fee if returned)
	How to determine cane size when placing an order. Choose 1 of 3 easy ways to determine cane length before placing order.
1. Measure the size of an existing cane. Do this method by simply measuring from the lowest part on the top of the handle to the bottom of the rubber tip. Round up to the nearest half inch. (see Diagram Above)   2. Measure the cane user a. Put on the user’s walking shoes. b. Have the user stand naturally upright as much as possible. c. Have their arms fall to the sides naturally with a normal relaxed bend at the elbow. (Please see Diagram Above for correct posture) d. Using a tape measure or yard stick, measure the distance from their wrist joint (bottom crease at the wrist) down to the floor. Round up to the nearest half inch. (**For accurate length a second person must read measurement to prevent wrist from moving)   3. Measure half the height in inches. (Only use if Step 1 or 2 are not available as options) (Although this works for most cane users it is not always exact. Choose this option at your own risk a 30% restocking fee applies to all returned cut canes) Most users cane measurements will be within one inch of half the users height.   a. Convert height into inches...(example 66 Inches) then divide in half = 33 inches. (round up to the nearest half inch.) b. Then add half an inch to this height. c. After receiving product use step #2 to confirm and change size if needed. The Estimated height would be 33.5 inches for this example.     Optional Sizing - click here if you would like it shortened from its standard length. To select a size for this walking cane please look for the option above that is located near the "Add to Cart" Button Above.
	*PLEASE NOTE: THIS INFORMATION IN NO WAY REPLACES A MEDICAL PROFESSIONAL’S RECOMMENDATION. CANES ARE NOT INTENDED TO BE USED LIKE A CRUTCH FOR FULL WEIGHT SUPPORT, CANES ARE INTENDED ONLY FOR BALANCE. The sizing information above is the standard measurement for a walking cane. Some users may require a special length. As with any mobility device please see you doctor before sizing and use. Varying heel height of different shoes may change users size. Sizing is a free courtesy. In most cases, sized canes will ship the same day. In rare cases sizing requests may not or cannot be sized. In these rare situations “pick up” call tags will not be issued and the item must be sent back to us to be sized. We will not ship out a new product. Please always check the item upon delivery to confirm the requested size. Canes can always be shortened but may not be lengthened.

Engraving is now available! Genuine Brass or Anodized Aluminum plaques are engraved and bent to the curve of the shaft of the cane. Please click on the images below to see more details.... (PLEASE NOTE - Engraving does not apply towards the $60 to recieve free shipping)